A DFM Checklist Before You Release Gerbers
Design for Manufacturability is cheaper at the desk than on the line. A short review catches annular-ring violations, missing masks and impossible tolerances.
Geometry limits
Confirm min trace/space, annular ring and hole-to-copper against the shop capability.
Mask and legend
Check solder mask clearance and legend overlap on pads.
Data completeness
BOM, centroid, fabrication and assembly notes all present before release.
Key Takeaways
Key Takeaways
- Verify limits against actual shop capability.
- Check mask and legend against pads.
- Release only with complete, consistent data.
